Clearomizer Tank Filling Instructions
2/17/2013
Clearomizer Tank Assembly includes:
1 - Tube Assembly
1 - Plastic Mouthpiece
___________________________________________________________________________________
1. Obtain Clearomizer tank assembly and a bottle of eliquid.
2. Screw the clearomizer onto your battery device.
3. Unscrew the mouthpiece from the clearomizer.
4. Fill the clearomizer tank by dripping eliquid around the edges of the tank until you reach the fill line as shown above. Be careful not to get eliquid into the center hole (venting hole).
5. Screw the mouthpiece back on the clearomizer.
6. Take 2 to 3 quick drags on the mouthpiece without pushing the button on the battery. This will help the eliquid fill the coils.
7. Place the e-cigarette on its side for about 2 minutes to let the eliquid fill the coils completely.
8. Hold down battery button for about 2 to 3 seconds while inhaling the vapor. If you get a burnt taste then repeat steps 6 and 7. If you get a smooth taste, then you can now enjoy your electronic cigarette!
Note: Although the picture does not show it, I recommend leaving the battery attached to the clearomizer as described in the instructions when filling the clearomizer tank. Tilting the clearomizer at a 45 degree angle will also aid the filling process.
